4×4 DVI Matrix

It is an 4-by-4 DVI matrix. It allows any of the four Input Channels (DVI) to be routed to any of the four Output Channels (DVI).

Users can choose several different ways to control the matrix: by using Button, RS232, and supplied remote control.

Features:
1.Allows up to four DVI audio/video devices to be independently switched to four DVI monitors, HDTV’s, or projectors.
2.The four output channels could show the same or different source simultaneously.
3.Support high definition resolutions, including: up to 1920×1200@60hz video formats.
4.Each port support both DVI inputs and DVI outputs.
5.With extra infrared extension receiver.
6.Four switching modes: panel buttons, local IR, RS232 and Ethernet.
7.DVI 1.2 supported.
8.Channel switching time within two seconds.

Specifications:
Operating Temperature Range………………………………………………………0 to +35°C (32 to +95°F)
Operating Humidity Range………………………………………………..5 to 90 % RH (no condensation)
Input Video Signal………………………………………………………………………………………..0.5-1.0 volts p-p
Input DDC Signal………………………………………………………………………………………….5 volts p-p (TTL)
Video Format Supported………………………………………………………………Up to 1920×1080@60Hz
Output Video………………………………………………………………………………………………………………DVI 1.2
Maximum Transmission Distance……………………………………1920X1080 15m over DVI cable
Power Consumption……………………………………………………………………………………12 Watts (Max.)
Dimensions………………………………………………………………………………………….W440xH130xT45mm
Mass (Main unit)…………………………………………………………………………………………………………1200g
NOTE: Specifications are subject to change without notice. Mass and dimensions are approximate.

Package list:
1.Main unit 4×4 DVI Matrix 1pcs
2.IR Remote controller 1pcs
3.IR extension line 1pcs
4.12V/DC Power Supply 1pcs
5.CD (Operating Instructions/control software ) 1pcs
NOTE: CD-ROM including Operating instructions and PC control software